Clear a jam from the automatic document feeder (ADF)
To clear a jam from the ADF, follow these steps:
1. Remove any loose pages from the ADF input tray.
2. Open the ADF access door (1) and the roller cover (2) inside the ADF.
3. Remove any jammed pages from inside the ADF.
4. Remove any jammed pages from the ADF output tray.
5. Close the ADF roller cover and access door.
6. At the scan destination, examine the scan output to determine which page was the
last to be completely scanned.
Automatic document feeder (ADF) problems 49
To Next Page
Loading...
