1
2
3
4
5
EN
If the green LED is on, plug the power supply into the back of the
device (1) and then press the Power button (2).
EN
Windows®: After the software is installed successfully, please connect the USB cable to scanner.
Mac: Connect the USB cable now.
FR
Si le voyant vert est allumé, branchez l'alimentation au dos de
l'appareil (1) puis appuyez sur le bouton Power.
FR
Windows®: After the software is installed successfully, please connect the USB cable to scanner.
Mac: Connect the USB cable now.
ES
Si el indicador LED verde está encendido, conecte la fuente de
alimentación en la parte posterior del dispositivo (1) y pulse el
botón de encendido (2).
ES
Windows®: After the software is installed successfully, please connect the USB cable to scanner.
Mac: Connect the USB cable now.
PT
Se o LED verde estiver aceso, conecte a fonte de alimentação à
parte de trás do dispositivo (1) e pressione o botão
Liga/desliga (2).
PT
Windows®: After the software is installed successfully, please connect the USB cable to scanner.
Mac: Connect the USB cable now.
HE
HE
Windows®: After the software is installed successfully, please connect the USB cable to scanner.
Mac: Connect the USB cable now.
To Next Page
Loading...
