HP ScanJet Pro 2500 f1 - Using the Scanner; Loading Originals and Paper Types

2 Use the scanner
The following topics describe how to load and scan originals.
Load originals
The following topics describe how to load originals into the document feeder and on the scanner glass.
Document loading tips
●
The maximum capacity of the document feeder is 50 sheets of 75 g/m
2
(20 lb) paper. When using
heavier paper, the maximum capacity is decreased.
TIP: Use the lines on the input tray paper guides to help avoid exceeding the document feeder
capacity.
●
Be sure that the documents are within these guidelines:
Width: 89 mm to 216 mm (3.5 in to 8.5 in)
Length: 148 mm to 3100 mm (5.8 in to 122 in)
Weight:
60 g/m
2
to 105 g/m
2
(16 lb to 28 lb)
●
Scanning the following types of documents might result in paper jams or damage to the documents.
Wrinkled or creased documents Curled documents
Torn documents Documents with paper clips or staples
Carbon paper Coated paper
Extremely thin, translucent paper Paper with adhesive notes or flags
attached
ENWW Load originals 11