4. Wipe the feed rollers from right to left. Rotate the rollers a full 360 degrees to ensure the entire roller
surface is cleaned.
CAUTION: Wait at least two minutes for the rollers to dry before loading documents into the
document input tray.
5. Close the document feeder hatch, and then reconnect the USB cable and power supply to the scanner.
6. Press the Power button to turn on the scanner, and then update the scanner maintenance history:
●
Open the HP Scanner Tools Utility.
●
Under Record Cleaning Rollers, click Record Cleaning to log this cleaning activity and update the
roller cleaning history.
Clean the product 31
To Next Page
Loading...
