4. Press the pick up roller module on both sides and rotate to remove.
5. Replace the pickup roller module as described in the instructions that were included with the
replacement kit.
6. Close document feeder hatch. Reconnect the USB cable and power supply to the scanner.
The scanner is now ready to use.
Order parts and accessories
To order maintenance parts for the scanner, see the HP scanner parts Web site at www.hp.com/buy/parts.
Item Part number
HP ScanJet Pro 2500 f1 ADF Roller Replacement Kit L2748A#101
38 Chapter 3 Care and maintenance ENWW
To Next Page
Loading...
