Control panel
Use the buttons on the control panel to start or cancel a scan, and to power the unit on and off.
Callout Name Description
1 Power button Press the Power button to power on the scanner. Press and hold
the Power button for three seconds to power off the scanner.
2 Scan button Press the Scan button to initiate a scan.
3 Cancel button Press the Cancel button to cancel a scan in progress.
4 Power LED When lit, indicates that the scanner is powered on.
Back view
Callout Description
1 USB input
2 Power supply input
4 Chapter 1 Product basics ENWW
To Next Page
Loading...