HP Scanjet Pro 3000 s2 - Use the Scanner; Loading Documents and Cards

2 Use the scanner
The following topics describe how to load and scan originals.
Load originals
The following topics describe how to load originals into the document feeder.
Document loading tips
●
The maximum capacity of the document feeder is 50 sheets of 75 g/m
2
(20 lb) paper. When
using heavier paper, the maximum capacity is decreased.
TIP: Use the lines on the input tray paper guides to help you to not exceed the document
feeder capacity.
●
The maximum card capacity, for card stock up to 15 points, is approximately 9–10 cards.
●
Be sure that your documents are within these guidelines:
Width: 74 mm to 215.9 mm (2.9 in to 8.5 in)
Length: 51 mm to 864 mm (2.0 in to 34 in)
Weight:
49 g/m
2
to 120 g/m
2
(13 lb to 32 lb)
●
The scanner document feeder can process cards that meet the following specifications:
Minimum size: 51 mm x 74 mm (2.0 in x 2.9 in)
Maximum size: 210 mm x 269 mm (8.3 in x 10.6 in)
Minimum weight:
253 g/m
2
(12 points or 102 lb)
Maximum weight:
326 g/m
2
(15 points or 120 lb)
●
Scanning the following types of documents might result in paper jams or damage to the
documents.
Wrinkled or creased documents Curled documents
10 Chapter 2 Use the scanner ENWW