Output
See the user's guide for general instructions on configuring and loading rigid media.
Multi-sheet printing (same dimensions)
Multiple copies of a single image can be made by setting the quantity to a number equal to or
greater than the number of the sheets you loaded. The printer prompts you to load more sheets
until the number of copies you specified has been printed. You can print any number of copies in
this configuration, even if the total number does not divide evenly into the number of sheets per
row. Only the last row may have a different number of sheets.
The Multi-Image feature is enabled by selecting the Print 2-Sided / Multi Image N-Up button in
the lower right corner of the Stored Jobs screen, then selecting Multi-Image N-Up in the following
screen. Each of the jobs across the belt can be different jobs, but all jobs must have the same color
set and resolution. Once the first job is selected, the printer displays jobs with a color set or
resolution mismatch with a red border. If a different print mode is desired, or if separate jobs have
different print modes but share the same resolution, a single print mode is changeable by
selecting Print Mode in the summary screen. Enter the number of image groups or ‘rows’ to be
printed and press Proceed.
To Next Page
Loading...
