Media page
Figure 6-4 Media page
To switch to the Media page, press the Media icon in the Activity Tray at the bottom of the screen.
1
Media information — Media name, size, print area, printable length
2 Wizard — Displays the Media Wizard. See Configure media on page 11 for details.
3 Settings — Enables you to adjust media handing and printing settings.
4 Configure — Configures the printer for a media type. See Configure media on page 11 for instructions.
5 Eject Sheet buttons (when sheet fed media is loaded) — Ejects the media sheet to the input our output side of the
printer.
6 Media advance buttons — Press the ▲ button to advance the media forward. Press the ▼ button to reverse the media
back.
7 Advance to cut — When roll-fed media is loaded, advances the media toward the output side far enough so that it can
be cut from the supply roll.
8 Load/Unload — Depending on whether media is configured and loaded, loads or unloaded the currently configured
media.
9 Sheet Ready — When a sheet of the currently configured media is in the load position, press this button to continue the
load process.
Media Settings menu
To display the Media Settings menu, press Settings on the Media page.
●
Change General Media Settings. For instructions, see Configure media on page 11.
●
View Print Speed Specific Settings. For instructions, see Media Wizard on page 11.
40
Chapter 6 Use the control panel ENWW
To Next Page
Loading...
