NOTE: Users of printers in California must disregard all references to the Printhead Flush or IPA in the
instructions or when displayed on the control panel. Instead, the alternative cleaning liquid specified at the
beginning of this section must be used.
1. Select from the control panel System > Tools > User Cleaning and Maintenance > Clean Service
Station Wiper.
2. Press Proceed to continue.
3. Wear gloves, for example latex gloves, to protect your hands from ink.
4. Using a lint-free cloth saturated with printhead flush (do not use isopropyl alcohol), wipe both sides of
the rubber wiper.
Figure 10-12 Service-station wiper blade
5. To reset the maintenance counter for this task and complete the procedure, press Proceed.
Clean the carriage wheels
CMYKcm — 40 Hours
CMYKW — 40 Hours
Ink dust and debris can accumulate on the carriage wheels. These particles become obstacles and friction for
the carriage wheels, which can cause repeating output anomalies on the printed media.
NOTE: Users of printers in California must disregard all references to the Printhead Flush or IPA in the
instructions or when displayed on the control panel. Instead, the alternative cleaning liquid specified at the
beginning of this section must be used.
There are eight carriage wheels to clean (A to H in the figure below).
84
Chapter 10 User cleaning ENWW
To Next Page
Loading...
