HP Slim Desktop S01 - Step 26: Remove PSU Screws; Step 27: Open PSU Case; Step 28: Remove PSU PCB; Step 29: Remove Electrolytic Capacitor

EL-MF877-00 Page 8
Template Revision C
Last revalidation date 09-May-2018
HPI instructions for this template are available at EL-MF877-01
Step29 Remove four screws covered
Step30 Remove the screw and open case
Step31 Loose screws and remove PCB from case
Step32 Remove Ele-Cap from PCBA
33. Step30 Show Ele-Cap on PCBA (C1)