HP SmartCalc 300s

Deleting АП STAT Editor Contents
(1)Press Снт) (STAT) ( (Edit).
(2)Pressiz (Del-A).
* This clears all of the sample data on the STAT
editor screen.
Note
* Note that you can perform the procedures under
"Inserting a Line" and "Deleting All STAT Editor
Contents" only when the STAT editor screen is on
the display.
B STAT Calculation Screen
The STAT calculation screen is for performing
statistical calculations with the data you input with
the STAT editor screen. Pressing the sj key while
the STAT editor screen is displayed switches to the
STAT calculation screen.
The STAT calculation screen also uses Linear format,
regardless of the current input/output format setting
on the calculator's setup screen.
E Using the STAT Menu
While the STAT editor screen or STAT calculation
screen is on the display, press sarn (STAT) to
display the STAT menu.
[The content to the STAT menu depends on whether
the currently selected statistical operation type uses
a single variable or paired variables.
LT 2:Dat ЛЕТ 2:Dat
gedit еа ЗРП Sim,
5:Var 6:MinMax 5:Var 6:MinMax
7:Reg
Single-variable Statistics Paired-variable Statistics
STAT Menu Itmes
Common Items
Select this
menu item; When you want to do this:
Display the statistical calculation type
ОТуре selection screen
Data Display the STAT editor screen
GEdit Display the Edit sub-menu for editing
_ STAT editor screen contents
GSum Display the Sum sub-menu of commands
= for calculating sums
“Мағ Display the Var sub-menu of commands for
calculating the mean, standard deviation, etc
'SMinMax Display the MinMax sub-menu of commands
a for obtaining maximum and minimum values
Paired-variable Menu Item
Select this п
menu item; When you want to do this:
Display the Reg sub-menu of commands for
regression calculations
Reg * For details see "Commands when Linear
Regression Calculation (A+BX)Is Selected"
and "Commands when Quadratic Regression
Calculation (_+CX?)Is Selected".
Single-variable(1-VAR) Statistical
Calculation Commands
The following are the commands that appear on the
sub-menus that appear when you select (4) (Sum),
5)( Var),or (6) (MinMax) on the STAT menu while
a single-variable statistical calculation type is
selected.
Хх
х=
хоп =, хех)?
ee 3g
xon-] (xx)
Sum Sub-menu (srr x (STAT) гї) (Sum))
wa M When you want to obtain this:
шуы Sum of squares of the sample data
(2Xx Sum of the sample data
Var Sub-menu ( srr (STAT) = (Var))
ча m When you want to obtain this:
(n Number of samples
ар Mean of the sample data
(3)»x0 n Population standard deviation
Gxoml | Sample standard deviation
MinMax Sub-menu (sar (STAT) @ (MinMax))
= ШЕ When you want to obtain this:
ПітіпХ | Minimum value
2) тахХ | Maximum value
Data: (1,2,
Single-variable Statistical Calculation
Select single-variable (1-VAR) and input the following
3,4,5,6,7,8,9,10} (FREQ:ON
(SHIFT МОБЕ@[3](5ТАТ) (ОМ); 70) 4dnX
(MODEI(Z)(STAT) 5:2, 64
STAT m
СО(Т-УАБ) ==
3
[1][{=)(2][=1(3][=\(4[ӊ=]| T reek
BFG@EME BIE) 3 |
GAMO ==
STAT [0]
І
0!
46