HP Sprocket 2-in-1 User Manual

2
LED Indicator Lights
Charging Indicator LED Light
LED Color/State Condition
O
Fully charged or not connected to a power source
Red, solid
Charging; printer can be used while charging
Red, blinking
During use, indicates a low battery before turning o. When o, user presses the
power switch and the device cannot power ON because of a low battery
Sele Mirror
• Use the reective surface on the front side
of the Viewnder as a self-portrait mirror.
Instant Camera Flash Functions
• When the device is powered on in
Instant Camera Mode, the camera will
automatically trigger the ash if it is
necessary for the light conditions.
Using the 10-second Timer Button
1. Press and release the Timer Button to toggle between turning the timer on and o.
2. Press the Shutter Release Button to begin the 10 second-countdown. A sound and white Timer LED Light will
alert you the timer is enabled. The timer will automatically disable after each photo is taken.
• To cancel the timer while it is counting down, press the Timer Button.
• The Timer LED Light will blink slowly for seven seconds and quickly for the nal three seconds before taking
the photo.
What if my HP Sprocket 2-in-1 isn’t responding or
won’t connect to my mobile device?
If you have trouble connecting or other issues,
reset the device. Remove the Paper Cover and
locate the pin-hole near the Paper Tray. Insert
a straight pin into the hole to press the Reset
Button until the printer turns o. Restart the
device.
Status Indicator LED Lights
LED Color/State Condition
O
The printer is OFF
White, solid
The printer is ON
White, fast blinking
The printer is booting up; LEDs will turn solid white when ON
White, slow blinking
Processing a print job from instant camera or mobile device
Red, solid
Printer in error state. Wait for the light to turn white to send a print job
Red, slow blinking
Out of paper. Insert more paper to continue printing
Micro-SD Storage LED Light
LED Color/State Condition
O
No Micro-SD card installed or card installed with available storage
Red, solid
Micro-SD storage is full. Photos cannot be saved, but can be printed
Red, slow blinking
Micro-SD card has space for approximately 20 more photos
Reset Button

HP Sprocket 2-in-1 Specifications

General

Print Resolution	313 x 400 dpi
Paper Size	2 x 3 inches
Camera Resolution	5 MP
Print Technology	ZINK (Zero Ink)
Battery	Built-in rechargeable Lithium-ion
Weight	0.4 lbs
Functions	Print
Mobile Printing Capability	Yes, through HP Sprocket App
Compatibility	iOS, Android