HP T5720 - Compaq Thin Client Quick Reference Guide

2 Configuration
Logging on
You can log on to your thin client either automatically or manually.
Automatic logon
The default for the XPe-based thin client is automatic logon. The administrator can use the HP Windows
Logon Configuration Manager in the Control Panel to enable/disable auto logon and change the auto
logon user name, password, and domain. Only the administrator account can change auto logon
properties.
NOTE: To save changes, be sure to disable the write filter cache or issue the -commit command
anytime during the current boot session. See
Enhanced Write Filter Manager on page 29 for
information about and instructions for disabling the write filter. Enable the write filter when you no longer
want permanent changes.
Enabling automatic logon bypasses the Log On to Windows dialog box. To log on as a different user
while auto logon is enabled, press and hold Shift while clicking Start > Shut Down > Log Off. This
displays the Log On to Windows dialog box and allows you to type in the logon information.
ENWW Logging on 5

HP T5720 - Compaq Thin Client Specifications

General

Brand	HP
Model	T5720 - Compaq Thin Client
Category	Server
Language	English