C Mounting the Thin Client
HP Quick Release
The HP Compaq t5730/t5735 thin client incorporates four mounting points on each side of the unit.
These mounting points follow the VESA (Video Electronics Standards Association) standard, which
provides industry-standard mounting interfaces for Flat Displays (FDs), such as flat panel monitors, flat
displays, and flat TVs. The HP Quick Release connects to the VESA-standard mounting points, allowing
you to mount the thin client in a variety of orientations.
NOTE: When mounting to a thin client, use the 10 mm screws supplied with the Quick Release Kit.
Figure C-1 HP Quick Release
To order this option, visit the HP Web site at http://h30143.www3.hp.com/configure2.cfm.
HP Quick Release 23
To Next Page
Loading...
