To Next PageTo Next Page
Need help?Do you have a question about the HP Compaq SP750 and is the answer not in the manual?
General| RAM | Up to 2 GB DDR SDRAM |
|---|---|
| Hard Drive | 40 GB to 80 GB HDD |
| Optical Drive | CD-ROM |
| Audio | Integrated AC'97 audio |
| Network | Integrated 10/100 Ethernet |
| Ports | Serial, Parallel, PS/2 |
| Operating System | Windows XP Professional |
| Front Ports | USB, audio |
| Rear Ports | USB, serial, parallel, Ethernet, Audio |
Explains symbols used in the manual for warnings and notes.
Provides guidance and warnings for authorized service technicians.
Lists additional resources for support and information.
Lists contact phone numbers for Compaq technical support and resellers.
Details the components and LEDs located on the front of the workstation.
Illustrates and describes the external connectors and jacks on the rear panel.
Explains the physical locations and supported devices for the workstation's seven drive bays.
Describes where to find the computer's serial number for information or parts ordering.
Lists and identifies key internal system components like power supply, system board, and fans.
Details available memory modules (RIMMs) and their part numbers for upgrades.
Lists various hard drives, CD-ROM, DVD-ROM, and Zip drives with their part numbers.
Provides a list of supported graphics controller cards and their part numbers.
Lists available network interface cards and audio/modem cards with part numbers.
Explains the risks of ESD and methods to prevent damage to components.
Details equipment and methods for personal grounding to prevent static damage.
Outlines safety precautions to follow when cleaning computer components and peripherals.
Lists the necessary tools, software, and materials for performing service procedures.
Steps to take before performing any removal or replacement procedure on the workstation.
Guides on removing side panel, front bezel, and other external covers.
Instructions for removing and installing CD-ROM, Diskette, and Hard Drives.
Steps for removing and installing memory boards and individual RIMMs.
Procedures for installing and removing the workstation's processor.
Detailed steps for safely removing and replacing the workstation's power supply unit.
Instructions on using the P49 jumper to disable or clear system passwords.
Procedure for clearing the workstation's CMOS configuration memory using a pushbutton switch.
Details jumper settings for SCSI and IDE hard drives, CD-ROM, and Zip drives.
Provides physical dimensions, weight, and power requirements for the system unit.
Details capacity, transfer rates, and seek times for various hard drive models.
Lists maximum color support and refresh rates for various graphics controller models.
Details specifications for Ethernet NICs, including connector type, environment, and electrical bus.
