Need help?Do you have a question about the HP Compaq d530 SFF and is the answer not in the manual?
General| Form Factor | Small Form Factor (SFF) |
|---|---|
| Processor | Intel Pentium 4 or Intel Celeron |
| Chipset | Intel 865G |
| Maximum Memory | 4 GB |
| Graphics | Integrated Intel Extreme Graphics 2 |
| Audio | Integrated AC'97 Audio |
| Network | Integrated 10/100 Ethernet |
| Operating System | Windows XP Professional |
| Power Supply | 200W |
| Memory | 256 MB to 2 GB DDR SDRAM |
| Storage | 40 GB HDD |
| Optical Drive | CD-ROM, DVD-ROM |
| Expansion Slots | 1 PCI |
| Front Ports | 2 USB 2.0 |
| Rear Ports | 4 USB 2.0, serial, parallel, VGA |
Details standard features of the HP Compaq Small Form Factor computer model.
Identifies and describes components on the computer's front panel.
Identifies and describes components on the computer's rear panel.
Explains the components and functions of the Easy Access Keyboard.
Details how to reprogram Easy Access buttons for custom applications.
Explains how to use the Windows Logo key with other keys for system functions.
Describes general functions supported by most mouse applications.
Indicates the location of the computer's serial number for service assistance.
Highlights features simplifying computer upgrades and servicing without tools.
Provides essential safety warnings and cautions before performing hardware upgrades.
Instructions for setting up the computer in a minitower configuration using a tower stand.
Explains the Smart Cover Lock function and its software control for security.
Details when and how to use the specialized Smart Cover FailSafe Key.
Step-by-step instructions for removing the screws securing the Smart Cover Lock.
Instructions for removing the computer's access panel and front bezel.
Detailed steps for removing the front bezel from the computer chassis.
Guide to installing additional DDR-SDRAM DIMMs into the computer.
Specifies requirements for DDR-SDRAM DIMMs for proper system operation.
Explains DIMM sockets, processor bus frequencies, and channel modes.
Diagram and table identifying four DIMM sockets and their channel assignments.
Provides cautions and initial steps for installing DDR-SDRAM memory modules.
Instruction on rotating the Easy Access drive bay to access memory sockets.
Step-by-step guide on installing a memory module into a DIMM socket.
Instructions for removing the expansion card cage from the computer chassis.
Guide to installing a PCI expansion card into the computer's expansion slots.
Steps to remove the slot cover for expansion card installation.
Instructions for removing an Accelerated Graphics Port (AGP) card from the AGP slot.
Guidelines for installing new drives, including hard, optical, and diskette drives.
Diagram showing locations of 3.5-inch and 5.25-inch drive bays.
Steps for removing an optical drive or a diskette drive from the computer.
Guide to installing an optional optical drive, including guide screw installation.
Steps for positioning and sliding the optical drive into its bay.
Instructions for connecting ribbon and audio cables to system board and optical drive.
Information on upgrading the computer's hard drive, PATA and SATA.
Steps for removing and replacing the computer's primary 3.5-inch hard drive.
Steps for physically removing the hard drive from its bay.
Illustrates connecting data and power cables to a PATA hard drive.
Illustrates connecting data and power cables to a SATA hard drive.
Diagram shows SATA and PATA hard drive connector locations on the system board.
Guidance on installing 3.5-inch devices, including bezel requirements.
Illustrates guide screw placement for diskette and hard drives.
Steps to remove the diskette drive bezel from the computer's front.
Steps for installing a hard drive into the computer's 3.5-inch drive bay.
Introduction to the MultiBay, a special drive bay supporting various removable drives.
Guidelines and cautions for hot-plugging MultiBay drives with the computer running.
Procedure for partitioning and formatting a MultiBay hard drive for Windows.
Instructions for removing the MultiBay security screw using a FailSafe Key.
Steps for inserting a drive into the computer's MultiBay.
Steps for removing a drive from the computer's MultiBay.
Details dimensions, weight, temperature, and humidity specifications for the d530 model.
Provides height, width, and depth measurements for the computer.
Specifies the computer's approximate weight in pounds and kilograms.
Lists operating and non-operating temperature and relative humidity ranges.
Details maximum operating and non-operating altitudes for the computer.
Information on operating voltage range, rated voltage range, and line frequency.
Details rated input current and heat dissipation for the computer.
Explains the cable-select feature for PATA drives and necessary cable configurations.
General guidelines for installing PATA drives, including channel usage and connectors.
Provides instructions and warnings for replacing the computer's real-time clock battery.
Instructions for replacing a coin cell battery using a Type 1 holder.
Steps to remove a coin cell battery from its holder (Type 1).
Instructions for replacing a coin cell battery using a Type 2 holder.
Steps to remove a coin cell battery from its holder (Type 2).
Steps to install a new coin cell battery into its holder (Type 2).
Instructions for installing cable locks and padlocks to secure the computer.
Illustrates how to install a padlock to secure the computer chassis.
Steps for installing the port security bracket on the rear of the computer.
Steps to remove the port security bracket from the computer.
Precautions to prevent damage from static discharge when handling components.
Describes methods for grounding oneself to prevent electrostatic discharge.
Further grounding methods using straps, tools, and kits.
Guidelines for basic computer and monitor care, including airflow and cleaning.
Guidelines for operating and cleaning optical drives safely.
Suggestions for preparing the computer for shipping, including data backup and packing.
To Next Page
