HP Compaq d530 SFF - Removing Drive from MultiBay

2-40 www.hp.com Hardware Reference Guide
Hardware Upgrades
Removing a Drive from the MultiBay
1. Exit all software applications, turn off the computer properly
through the operating system, then turn off any external devices.
2. Remove the MultiBay security screw, if it has been installed.
Refer to the “Uninstalling the MultiBay Security Screw” section
for instructions on removing the MultiBay security screw.
3. Slide the eject lever to the left to eject the drive from the
MultiBay.
Removing a Drive from the MultiBay