To Next PageTo Next Page
Need help?Do you have a question about the HP Compaq dc7100 SFF and is the answer not in the manual?
General| Processor Speed | Up to 3.8 GHz |
|---|---|
| Graphics | Integrated Intel Graphics Media Accelerator 900 |
| Audio | Integrated AC'97 audio |
| Form Factor | Small Form Factor (SFF) |
| Power Supply | 240W |
| Processor | Intel Pentium 4 |
| Chipset | Intel 915G Express |
| Memory | Up to 4 GB DDR |
| Storage | 40 GB to 160 GB HDD |
| Optical Drive | CD-ROM or DVD-ROM |
| Network | Integrated Intel Gigabit Ethernet |
| Expansion Slots | 1 PCI Express x16 |
| Ports | USB 2.0, serial, parallel, VGA |
| Operating System | Windows XP Professional |
Details the architecture based on Intel Pentium 4 processor and 915G chipset.
Provides environmental, electrical, and physical specifications for the systems.
Details the Intel Pentium 4 processor features and overview.
Explains the DDR memory architecture and DIMM configurations.
Describes the PCI bus and its implementation, including PCI 2.3 and PCI Express.
Details availability and control of subsystems via interrupts and DMA.
Covers security, power management, temperature, and overall system status.
Details legacy EIDE (PATA) and serial ATA (SATA) interfaces.
Describes the RS-232-C serial interface and its programming.
Covers the parallel interface supporting SPP, EPP, and ECP modes.
Details the interface provided by the LPC47B397 I/O controller for keyboards/mice.
Explains the USB interface provided by the 82801 component.
Details the Intel 915G/GV GMCH integrated graphics controller functions.
Explains how the power supply assembly is controlled via programmable logic.
Describes the process of upgrading system BIOS firmware via flash ROM.
Explains how to configure system functions using the ROM-based Setup utility.
Lists POST error messages and their probable causes.
