HP T5735 - Compaq Thin Client Hardware Reference Guide

5 Installing the Rubber Feet
To install the rubber feet:
1. Remove the feet from their backing.
2. Line up the hole in each foot with a VESA hole on the bottom of the thin client. Press the foot down
firmly to secure it to the thin client.
NOTE: The feet provide a protective cushion between the thin client and whatever surface it sits
on or is mounted to.
Figure 5-1 Installing the rubber feet
ENWW 5

HP T5735 - Compaq Thin Client Specifications

General

Brand	HP
Model	T5735 - Compaq Thin Client
Category	Server
Language	English