●
Installing a Secondary Flash Memory Module on page 20
●
Installing a Second SO-DIMM on page 21
NOTE: Option kits include more detailed installation instructions.
8. Replace the side access panel and metal side cover. See Removing and Replacing the Side
Access Panel and Metal Side Cover on page 16 for more information.
9. Install the stand, if you will be using the thin client unmounted in a vertical orientation. See
Installing
the Stand on page 6 for more information.
10. Replace the secure USB compartment cover. See
Removing and Replacing the Secure USB
Compartment Cover on page 14 for more information.
11. Reconnect any external devices and power cords.
12. Turn on the monitor, the thin client, and any devices you want to test.
13. Load any necessary drivers.
NOTE: You can download select hardware drivers from HP at http://www.hp.com/country/us/eng/
support.html.
14. Reconfigure the thin client, if necessary.
ENWW General Hardware Installation Sequence 13
To Next Page
Loading...
