Need help?Do you have a question about the HP t5740 - Thin Client and is the answer not in the manual?
General| Processor | Intel Atom N280 1.66 GHz |
|---|---|
| Graphics | Intel GMA 950 |
| Network | 10/100/1000 Gigabit Ethernet |
| USB Ports | 6 x USB 2.0 |
| RAM | 1 GB DDR3 SDRAM |
| Operating System | Windows Embedded Standard |
| Additional Ports | 1 x DVI-I, 1 x Serial |
Explains the meaning of WARNING, CAUTION, and NOTE symbols used in the document.
Lists and describes the standard features of the HP thin client.
Details HP's suite of management solutions for thin clients.
Identifies and describes the components located on the front panel of the thin client.
Identifies and describes the components located on the top panel of the thin client.
Identifies and describes the components located on the rear panel of the thin client.
Instructions for installing the wireless antenna on the thin client.
Step-by-step guide for attaching the rubber feet to the thin client.
Instructions for attaching the stand to the thin client for stability.
Procedure for detaching the stand from the thin client.
Explains how to use the power cord retention slot to prevent accidental disconnection.
Details the keyboard layout and function of various keys on the thin client.
Describes the functions of the Windows Logo Key in combination with other keys.
Lists key combinations that perform specific functions on HP thin clients.
Explains that mouse functions depend on the software applications being used.
Shows the location of the unique serial number on the thin client.
Provides a step-by-step sequence for installing or replacing hardware components.
Instructions for installing a USB device into the secure USB compartment.
Procedure for removing and installing the internal battery of the thin client.
Detailed steps for removing and replacing the secure USB compartment cover.
Instructions on how to properly replace the secure USB compartment cover.
Guide for removing and replacing the side access panel and metal side cover.
Instructions for reassembling the metal side cover and side access panel.
Overview of various optional hardware components that can be installed.
Steps for installing a secondary flash memory module into the thin client.
Instructions for installing a second SO-DIMM memory module.
Guide for installing PCI Express expansion modules and cards.
Information on installing and using external USB drives with the thin client.
Details physical dimensions and approximate weight of the thin client.
Specifies operating and non-operating temperature and humidity ranges.
Details maximum operating altitude and power supply specifications.
Instructions for using a security cable lock to secure the thin client.
Details the HP Quick Release mechanism for mounting the thin client.
Steps for connecting the HP Quick Release to the thin client and mounting device.
Illustrates various supported methods for mounting the thin client.
Warns against unsupported mounting methods and potential damage.
Provides guidance on maintaining and cleaning the thin client.
Details the approved orientations for operating the thin client.
Highlights unsupported orientations that can lead to failure or damage.
Precautions to avoid electrostatic discharge and protect components.
Describes various methods for grounding to prevent static electricity damage.
Guidelines for preparing the thin client for shipping.
Instructions for returning the thin client for repair or exchange.
To Next Page
