C Mounting the Thin Client
HP Quick Release
The HPt5740/t5745 thin client incorporates four mounting points on each side of the unit. These
mounting points follow the VESA (Video Electronics Standards Association) standard, which provides
industry-standard mounting interfaces for Flat Displays (FDs), such as flat panel monitors, flat displays,
and flat TVs. The HP Quick Release connects to the VESA-standard mounting points, allowing you to
mount the thin client in a variety of orientations.
NOTE: When mounting to a thin client, use the 15 mm screws supplied with the Quick Release Kit.
Figure C-1 HP Quick Release
To order this option, visit the HP Web site at http://h10010.www1.hp.com/wwpc/us/en/sm/WF06c/
A10-51210-347116-329242-347116-1838057-1838058-1838059.html.
ENWW HP Quick Release 27
To Next Page
Loading...
