HP Tc4400 - Compaq Tablet PC - Page 38

Embedded Security for ProtectTools
Reference Guide 3–11
Temporarily Disabling Embedded Security
To temporarily disable Embedded Security:
1. Select Start > All Programs > HP ProtectTools Security
Manager > Embedded Security > User Settings.
2. Under Embedded Security, click Disable.
Enabling Embedded Security After Temporary
Disable
Embedded Security will automatically be reenabled upon
Windows restart if it was disabled through User Settings.
✎
If you log off your Windows account but do not restart the
computer, the Embedded Security features will still be disabled
when you or another user logs on to Windows, until the
computer is restarted.
Permanently Disabling Embedded Security
To permanently disable Embedded Security:
1. Select Start > All Programs > HP ProtectTools Security
Manager > Embedded Security > Advanced.
2. Under Embedded Security, click Disable.
3. Enter your owner password at the prompt, and then click OK.