HP Tc4400 - Compaq Tablet PC - Page 43

4–4 Reference Guide
BIOS Configuration for ProtectTools
Advanced Tasks
Managing ProtectTools Settings
Some of the features of ProtectTools Security Manager can be
managed in BIOS Configuration.
Enabling and Disabling Smart Card Power-on
Authentication Support
Enabling this option allows you to use the smart card for user
authentication when you turn on the computer.
To enable smart card power-on authentication support:
1. Select Start > All Programs > HP ProtectTools Security
Manager > BIOS Configuration.
2. Enter your Computer Setup administrator password at the
BIOS administrator password prompt, and then click OK.
3. Select Security.
4. Click Advanced.
5. Under Smart Card Security, select the Enable Smart Card
Power-on Authentication Support check box.
✎
To disable smart card power-on authentication, clear this
check box.
6. Click Apply, and then click OK in the ProtectTools window
to save your changes.