HP Tc4400 - Compaq Tablet PC - Page 54

BIOS Configuration for ProtectTools
Reference Guide 4–15
Enabling and Disabling Power-on
Authentication on Windows Restart
This option allows you to enhance security by requiring users to
enter a power-on, TPM, DriveLock, or smart card password when
Windows restarts.
To enable or disable power-on authentication on Windows restart:
1. Select Start > All Programs > HP ProtectTools Security
Manager > BIOS Configuration.
2. Select Passwords.
3. Select the Enable Power-on Authentication on Windows
restart check box.
✎
If you want to disable power-on authentication on Windows
restart, clear this check box.
4. Click Apply, and then click OK in the ProtectTools window
to save your changes.