5–22 Reference Guide
Credential Manager for ProtectTools
Configuring Credential Properties
From the Credentials tab of the “Authentication and
Credentials” page, you can view the list of available
authentication methods, and modify the settings.
To configure the credentials:
1. Select Start > All Programs > HP ProtectTools Security
Manager > Credential Manager.
2. Click Authentication and Credentials.
3. Click the Credentials tab.
4. Click the credential type you want to modify.
❏ To register the credential, click Register, and then follow
the on-screen instructions.
❏ To delete the credential, click Clear, and then click Ye s in
the confirmation dialog box.
❏ To modify the credential properties, click Properties, and
then follow the on-screen instructions.
5. Click Apply, and then click OK.
To Next Page
Loading...
