Computer Setup security features
Security 3–3
Removing stringent security
To remove stringent security in Computer Setup:
1. Open Computer Setup by turning on or restarting the
computer, and then pressing
f10 while the “F10 = ROM
Based Setup” message is displayed in the lower-left corner
of the screen.
2. Use the arrow keys to select Security > Password options,
and then press
enter.
3. Use the arrow keys to select Disable in the Stringent
security field, and then press
f10.
4. To save your preferences, use the arrow keys to select File >
Save changes and exit. Then follow the instructions on the
screen.
Your preferences go into effect when the computer restarts.
To Next Page
Loading...
