Computer Setup security features
Security 3–5
Computer Setup System IDs
The System IDs feature in Computer Setup allows you to display
or enter the computer asset tag and ownership tag.
✎
To prevent unauthorized access to this information, you must
create a setup password in Computer Setup. For additional
information, refer to “Setting a setup password.”
To manage this feature:
1. Open Computer Setup by turning on or restarting the
computer, and then pressing f10 while the “F10 = ROM
Based Setup” message is displayed in the lower-left corner
of the screen.
2. To view or enter identification tag IDs for system
components, use the arrow keys to select Security >
System IDs.
3. To confirm the information or your preferences, press
f10.
4. To save your information or preferences, use the arrow keys
to select File > Save changes and exit, and then follow the
instructions on the screen.
Your preferences go into effect when the computer restarts.
To Next Page
Loading...
