IBM (AIX)22
The n in the filename is the instance number assigned to the drive by the operating system, where 0
is the first device, 1 is the second and so on.
/dev/rmtn.4 Yes No disabled
/dev/rmtn.5 No No disabled
/dev/rmtn.6 Yes Yes disabled
/dev/rmtn.7 No Yes disabled
Rewind on Close Normally, the drive repositions the tape to BOT (Beginning of Tape) when the
device file is closed. Using the no rewind option is useful when creating and
reading tapes that contain multiple files.
Retension on Open Retensioning consists of winding to EOT (End of Tape) and then rewinding to
BOT, in order to reduce errors. If this option is selected, the tape is positioned
at BOT as part of the open process.
Compression Compression can be disabled or enabled.
Filename Rewind on Close Retension on Open Compression
To Next Page
Loading...
