Problems
Memory Test Error 1of1
Note: this error is indicated by a series of beeps while the screen remains blank
Have you checked that... How
The PC’s memory modules are installed
correctly
!
1 Disconnect the power cord.
2 Remove the PC’s cover.
3 Check the memory modules are correctly installed, of the correct
type and in the correct sockets.
4 Close the PC, reconnect the power cord and check that the PC
boots (starts).
The PC’s memory modules are working
!
1 Disconnect the power cord.
2 Remove the PC’s cover.
3 Replace the memory modules by known working memory
modules from the same model of PC.
4 Close the PC, reconnect the power cord and check that the PC
boots (starts).
Advanced Troubleshooting
Have you checked that... How
You are using the latest BIOS for your
PC
!
Download the latest BIOS and instructions for its installation from
HP’s support web site.
If the problem persists, contact your authorized support provider
To Next Page
Loading...
