12 Installing the IBM Turbo 16/4 Token-Ring ISA Adapter
Microsoft Windows for Workgroups 3.11
12 Installing the IBM Turbo 16/4 Token-Ring ISA Adapter
Microsoft Windows for
Workgroups 3.11
Connecting to a
Windows NT 4.0 Server
Requirements
• HP Vectra with Windows for Workgroups 3.11.
• IBM Turbo 16/4 Token Ring ISA adapter and driver disk version 2.22.
• Driver File: IBMTOK5.386, version 5.51
• Microsoft Windows for Workgroups 3.11 media.
• Microsoft Windows NT 4.0 Server system that supports NetBEUI, NWLink
IPX/SPX Compatible Transport, and NWLink NetBIOS network protocols.
Device Configuration
Procedure
1 With the HP Vectra turned off, install the IBM Turbo 16/4 Token Ring ISA
adapter into an ISA slot.
2 Connect network cable media to the IBM Turbo 16/4 Token Ring ISA
adapter.
3 After Windows loads, open the “NETWORK” Program Group, and double-
click on “Network Setup”.
4 Click on the “Networks” button in the “Network Setup” dialog box.
5 Click on the “Install Microsoft Windows Network:” option, and click “OK”.
6 Click on the “Drivers” button from the “Network Setup” dialog box, and
click on “Add Adapter”.
7 Click “OK” to accept the default choice of “Unlisted or Updated Network
Adapter”.
Device Configuration Vectra Vli8
Interrupt 03
I/O Address A20
To Next Page
Loading...
