User’s Guide 5–1
5
Preparing the Monitor for Shipping
Keep the original packing box in a storage area. You may need it later if you move or ship your monitor.
Preparing the Monitor for Shipping
1. Disconnect the power, video, and audio cables from the monitor.
2. Set the monitor base on a soft, protected surface.
Preparing the monitor for shipping
3. Hold the base with one hand, where it attaches to the rear of the monitor, and push the monitor forward, folding
the monitor flat onto the soft, protected surface.
4. Push monitor down in horizontal direction to shipping position.
5. Place the monitor and base in the original packing box.
WARNING: Before folding the monitor, turn off the monitor power, and disconnect all power, video, and audio
cables. To disconnect power from the equipment, unplug the power cord from the power outlet by grasping the
power plug firmly. Never pull on the cord.
CAUTION: The screen is fragile. Placing the monitor screen down on a flat, soft area prevents scratches, defacing,
or breakage. Avoid applying pressure to the LCD screen; doing so can cause damage.
To Next Page
Loading...
Need help?
General
