System Overview
HP x4000 Workstation Feature Set
Chapter 1 13
HP x4000 Workstation Feature Set
The following table provides an overview of the x4000 Workstation
feature set.
Feature Description
System Board • Eight-layer extended ATX form-factor
• Single-sided
• Four power/ground layers
• Four signal layers
Processor(s) Intel dp Xeon processors:
• 1.5 GHz, 1.7 GHz, or higher with a quad-pumped 100MHz
Front side bus
• Netburst Microarchitecture with 20-stage instruction pipeline
Chipset Intel 860 chipset, including:
• Memory Controller Hub (MCH)
• Interface Controller Hub (ICH2)
• PCI 64-bit Hublink (P64H)
Memory Controller
Hub (MCH)
Provides the interface between the front side bus, memory, AGP,
hublink A, and hublink B. It supports:
• One or two Intel Xeon processor(s)
• Dual Rambus channels capable of supporting PC800 RIMMs
• AGP Pro 110 4X graphics with 1.5 V signaling
• 8-bit, 133 MB/s hublink A to ICH2, which bridges to the 33
MHz PCI bus
• 16-bit, 266 MB/s hublink B to P64H, which bridges to the 66
MHz PCI bus
To Next Page
Loading...
