HP Workstation x4000 - Page 16

Installing Accessories
Overview
Chapter 214
Overview
This chapter contains the following topics that explain accessory
installation and removal techniques:
• “Cover and Front Bezel” on page 15
• “Hard Disk Drive Cage” on page 19
• “Chassis Beam Assembly” on page 22
• “Memory Expander Card (MEC)” on page 25
• “System Memory” on page 27
• “Graphics Card” on page 32
• “SCSI Hard Drive” on page 37
• “CD-RW or DVD” on page 41
• “Processor” on page 45
NOTE Check your configuration every time you install, remove, or upgrade an
accessory. For instructions on how to check your configuration using the
HP Setup program, refer to the Getting Started Guide that came with
your x4000 Workstation, or the HP x4000 Workstation Technical
Reference Guide located at www.hp.com/workstations/support.