EasyManua.ls Logo

HP Workstation z400

HP Workstation z400
99 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Processor information
Storage device information and configuration
Graphics / audio / communications information and configuration
And more...
Comprehensive list of diagnostic test available with new added features:
Highly configurable testing options: quick / complete / custom / interactive / non-interactive
Specific failing memory DIMM identification
Tests video card memory
Launches DST Smart tests for both SATA and SAS drives
Many other tests and diagnostics
Warranty Code output – A unique warranty code is generated for each failure which can be used
to validate diagnostic use for a specific system
Easy to use - uses similar user interface as previous field diagnostics, HP Insight Diagnostics
True End2End diagnostics – same diagnostics modules used in factory
Easy to obtain
Download from Web
USB key bootable or CD bootable
Included with restore media
It is expected that these Vision diagnostics will be run on supported products when attempting to
troubleshoot system issues.
Overview
The HP Vision Field Diagnostics utility allows you to view information about the hardware configuration
of the workstation and perform hardware diagnostic tests on the subsystems of the workstation. The
utility simplifies the process of effectively identifying, diagnosing, and isolating hardware issues.
The Survey tab is displayed when you invoke HP Vision Field Diagnostics. This tab shows the current
configuration of the workstation. From the Survey tab, there is access to several categories of
information about the workstation. Other tabs provide additional information, including diagnostic test
options and test results. The information in each screen of the utility can be saved as an html file and
stored on a diskette or USB flash drive.
Use HP Vision Field Diagnostics to determine if all the devices installed on the workstation are
recognized by the system and functioning properly. Running tests is optional but recommended after
installing or connecting a new device.
You should run tests, save the test results, and print them so that you have printed reports available
before placing a call to the Customer Support Center.
NOTE: Third-party devices may not be detected by HP Vision Field Diagnostics.
ENWW Self-troubleshooting with HP Vision Field Diagnostics 77

Related product manuals