HP xw3400 - Workstation Installation Guide

SATA optical drive installation
This document describes how to install a standard 5.25-inch, half-height Serial ATA (SATA) optical drive
in your HP workstation.
Kit contents
●
13.335 cm (5.25 inch), half-height SATA optical drive
●
SATA interface cables
●
Four M3 guide screws
●
Optional application software CD (based on optical drive)
●
Warranty information
Tools required
●
T-15 Torx screwdriver
●
Flat-blade screwdriver
Before you begin
To view QuickSpecs and determine the compatibility of this product with your HP workstation, see
http://www.hp.com/go/productbulletin.
© 2007–2009 Hewlett-Packard Development Company, L.P. Microsoft
Window XP and Windows Vista are U.S. registered trademarks of Microsoft
Corporation. Printed in the U.S.
ENWW Kit contents 1

HP xw3400 - Workstation Specifications

General

Brand	HP
Model	xw3400 - Workstation
Category	Desktop
Language	English