3. Install one 6-32 x 1/4 in. screw (silver) per DX115 unit for shipping support as shown.
CAUTION: Failure to install the shipping screw may result in damage to the removable hard drive
system.
HP xw4000 Workstation series
1. Install four, M3 x 5mm screws (black) in the lower four mounting holes.
2. Install the DX115 unit in the optical drive bay using the quick release system.
3. Install one, M3 x 5mm screw (black) per DX115 unit for shipping support as shown.
ENWW Step 2—Installing the DX115 case into the optical drive bay 5
To Next Page
Loading...
