HP Xw6200 - Workstation - 2 GB RAM Installation Guide

Page 1 of 20
Sliding Rack Mount Kit Installation
Sliding Rack Mount Kit Installation
HP xw6200 Workstation
This document describes how to install the sliding rack mount kit on an HP xw6200 Workstation and how
to install the workstation into a rack.
Kit Contents
This product is shipped with the necessary supplies for installing the sliding rack kit on an HP xw6200
Workstation in HP round hole and square hole racks, earlier HP racks, and some third-party racks
including some with threaded holes. The following list describes all of the included parts. Not all parts are
used with every application.
Earlier HP Racks
Parts for installing the sliding rack mount in HP legacy racks are sold separately in adapter kit part number
5064-9677. This adapter includes these parts:
A
Outer slide assembly (x2)
C
Flanges (x2)
B
Inner slide assembly (x2)
D
M4 screws (x8)
B.
C.
A.
D.
AA
Front bracket (x2)
BB
M5x16mm screw (x4)
CC
M6 flat head screw (x2)
AA.
BB.
CC.

HP Xw6200 - Workstation - 2 GB RAM Specifications

General

Model	Xw6200
RAM	2 GB
Form Factor	Tower
Chipset	Intel E7525
Category	Workstation
Graphics	Integrated or dedicated (specific model varies)
Product Type	Desktop
Audio Output	Integrated sound card
Networking	Integrated Ethernet
Processor Socket	Socket 604
Optical Drive	DVD-ROM, DVD-RW
Expansion Slots	PCI, PCI-X
Ports	USB, serial, parallel, audio, Ethernet
Operating System	Microsoft Windows XP Professional, Microsoft Windows XP Home