HP xw6200 Workstation - Memory

NOTE :
**May mix hard drive types. First hard drive must be a Serial ATA drive.
*** May mix hard drive types. SCSI Controller required. Mixed drive types not supported with Linux.
Factory Integrated
RAID*
RAID 0 Configuration – Striped Array 32-Bit Not supported
RAID 1 Configuration – Mirrored Array 32-Bit Not supported
* NOTE: Requires 2 identical hard drives (speeds, capacity, interface).
No Linux support. 64-Bit not supported with Serial ATA Drives.
Drive controllers Integrated serial ATA controller 32-Bit, 64-Bit 7.2, 7.3,
WS3, WS4
Optional Ultra 320 SCSI controller (required if HDs are SCSI) - basic 32-Bit, 64-Bit 7.2, 7.3,
WS3, WS4
Optional U320 SCSI Controller - LSI 20320AR RAID 0,1 (required with
SCSI HDDs)and external connector
32-Bit, 64-Bit 7.2, 7.3,
WS3, WS4
* NOTE: Can be sold and used with 1 or 2 SATA drives as a stand alone controller (no SCSI HDD).
Memory -
One of the following
Windows XP Red Hat Linux
256 MB DDR-2 PC2-3200 (400 MHz) ECC Registered (1 x 256 MB) 32-Bit, 64-Bit 7.2, 7.3
512 MB DDR-2 PC2-3200 (400 MHz) ECC Registered (2 x 256 MB) 32-Bit, 64-Bit 7.2, 7.3, WS3,
WS4
1 GB DDR-2 PC2-3200 (400 MHz) ECC Registered (2 x 512 MB) 32-Bit, 64-Bit 7.2, 7.3, WS3,
WS4
2 GB DDR-2 PC2-3200 (400 MHz) ECC Registered (2 x 1 GB) 32-Bit, 64-Bit 7.2, 7.3, WS3,
WS4
2 GB DDR-2 PC2-3200 (400 MHz) ECC Registered (4 x 512 MB) 32-Bit, 64-Bit 7.2, 7.3, WS3,
WS4
3 GB DDR-2 PC2-3200 (400 MHz) ECC Registered (2 x 1 GB + 2 x 512
MB)
32-Bit, 64-Bit 7.2, 7.3, WS3,
WS4
4 GB DDR-2 PC2-3200 (400 MHz) ECC Registered (2 x 2 GB) 32-Bit, 64-Bit 7.2, 7.3, WS3,
WS4
4 GB DDR-2 PC2-3200 (400 MHz) ECC Registered (4 x 1 GB) 32-Bit, 64-Bit 7.2, 7.3, WS3,
WS4
6 GB DDR-2 PC2-3200 (400 MHz) ECC Registered (2 x 2 GB + 2 x 1 GB) 64-Bit 7.2, 7.3, WS3,
WS4
8 GB DDR-2 PC2-3200 (400 MHz) ECC Registered (4 x 2 GB) 64-Bit 7.2, 7.3, WS3,
WS4
QuickSpecs
HP xw6200 Workstation
Standard Features - Custom Components
DA - 11975 Worldwide — Version 46 — May 25, 2007 Page 5