HP xw8600 - Workstation - Page 41

Heading Option Description
Device Options Enables you to set the following device options:
●
Num Lock State at Power-On (On or Off)
●
S5 Wake-on-LAN (Enable or Disable)
●
Unique Sleep State Blink Rates (Enable or Disable)
●
Monitor Tracking (Enable or Disable)
●
NIC PXE Option ROM* Download (Enable or Disable)
●
SAS Option ROM* Download (Enable or Disable)
●
SATA RAID Option ROM* Download (Enable or Disable)
●
PCIX Secondary Latency Timer:
◦
Default
◦
# PCI Clocks
●
SAS Latency Timer:
◦
Default
◦
# PCI Clocks
●
Peer-to-Peer Reads
●
Fast Delayed Transaction Timer
Slot 1 - PCI Slot 1 option ROM download (Enable or Disable), and latency timer.
Slot 2 - PCIe x16 Slot 2 option ROM download (Enable or Disable).
Slot 3 - PCIe x8
(4)
Slot 3 option ROM download (Enable or Disable).
Slot 4 - PCIe x16
(8)***
Slot 4 option ROM download (Enable or Disable).
Slot 5 - PCIe
x8***
Slot 5 option ROM download (Enable or Disable).
Slot 6 - PCIe x8
(4)
Slot 6 option ROM download (Enable or Disable).
Slot 7 - PCI-X
133
Slot 7 option ROM download (Enable or Disable), and latency timer and speed.
* Available on selected models.
** These options should be used by advanced users only.
*** For information about specifying lane allocation, see PCI Lane Allocation under the Advanced, Chipset/Memory description above.
Workstation management
The HP Client Management Solutions (CMS), available for download from http://www.hp.com/go/
easydeploy, are standards-based solutions for managing and controlling workstations in a networked
Table 3-1 Computer Setup (F10) Utility menu descriptions (continued)
ENWW Workstation management 31