Processor (System processor
on page 108)
System board (System board
on page 110)
Security lock (Padlock loop) (optional)
If a security padlock is installed on your workstation, remove it before servicing the workstation.
Removing the security lock
To remove the padlock, unlock it and slide it out of the padlock loop as shown in the following figure.
Figure 4-2 Removing the security lock
Cable lock (optional)
If a cable lock is installed on your workstation, remove it before servicing the workstation.
Table 4-4 Workstation component disassembly order (continued)
ENWW Removing and replacing components 55
To Next Page
Loading...
