20
Technical white paper | HP Z840 Workstation
High-density storage option
HP has developed an innovative SAS/SATA storage solution for the
Z840 Workstation.
The features
• Transforms the four standard internal 3.5" form factor drive bays into eight 2.5" bays
• Compatible with industry standard SAS and SATA 2.5" drives (HDD and SSD)
• Supports drives up to a 9W power level (e.g. 15K SAS)
• Operates at 6 Gb/s and is compliant with industry specications SAS 2.1 and SATA 3.1
• The solution consists of 2 drive cage modules, each converting two 3.5" bays into four 2.5" bays
• Full tool-free design: drive installation, drive carrier installation, and drive cage installation
• Independent drive access (no need to remove the drive cage module)
• Blind-mate (direct) drive connections (no cables)
• Drives may be secured via the lockable side access panel
Standard four 3.5" bays
Eight 2.5" bays
To Next Page
Loading...
