Security
Setup Utility Device Security
From the Device Security menu in the Setup utility, you can
disable or enable an optical drive or a diskette drive.
To disable or reenable system devices in the Setup utility:
1. Open the Setup utility by turning on or restarting the
computer, and then pressing fl0 while the Setup message
is displayed in the lower-left corner of the screen.
2. Select Security > Device Security, and then press enter.
3. Use the arrow keys to select an item. Then:
To disable an item, press f5 or f6 to toggle the _eld _br the
item to Disable, and then press enter.
To reenble an item, press f5 or f6 to toggle the _eld _br the
item to Enable, and then press enter.
4. When a con_rmation prompt with your preference selected is
displayed, press enter.
5. To save your preferences and exit the Setup utility, press fl0,
and then _bllow the instructions on the screen.
Your preferences are in effect when the computer restarts.
6-10 Hardware and Software Guide
To Next Page
Loading...
