HP ze2000 - Displaying System Information in Setup

SoftwareUpdatesandRecoveriesandSystemSoftware
Displaying System Information
The Ibllowing procedure explains how to display system
inlbrmation in the Setup utility. If the Setup utility is not open,
begin at step 1. If the Setup utility is open, begin at step 2.
1. To open the Setup utility, turn on or restart the notebook in
Windows, and then press tl g while the prompt "Press <F 10>
to enter setup" is displayed in the lower left corner of the
screen.
2. Access the system inlbrmation on the Main and Advanced
menus.
To display most of the system inlbrmation available in the
Setup utility, use the arrow keys to select the Main menu.
To display video memory in_brmation, use the arrow keys
to select the Advanced menu.
.
To close the Setup utility without changing any settings, use
the arrow keys to select the Exit menu > Exit Discarding
Changes, and then press enter. (The notebook restarts in
Windows.)
Hardware and Software Guide 8-11