SoftwareUpdatesandRecoveriesandSystem Software
Closing the Setup Utility
You can close the Setup utility with or without saving changes.
• To close the Setup utility and save your changes tiom the
current session, use either of the tbllowing procedures:
Press fl0, and then tbllow the instructions on the screen.
-or-
If the Setup utility menus are not visible, press esc to
return to the menu display. Then use arrow keys to
select the Exit menu > Exit Saving Changes, and then
press enter.
When you use the fl0 procedure, you are offered an option
to return to the Setup utility. When you use the Exit Saving
Changes procedure, the Setup utility closes when you press
enter.
• To close the Setup utility without saving your changes tiom
the current session:
If the Setup utility menus are not visible, press esc to return
to the menu display. Then use arrow keys to select the
Exit menu > Exit Discarding Changes, and then press enter.
After the Setup utility closes, the notebook restarts in Windows.
8-14 Hardware and Software Guide
To Next Page
Loading...
