Multimedia
Displaying a Video Image
To display an image on the notebook display or a video device
display, both the notebook and the video device must be
turned on.
>> To switch the image between the notebook display and the
video device display, repeatedly press the In+f4 hotkey.
Pressing the In+f4 hotkey switches the image among the
notebook display, the connected video device display, and
simultaneously on both displays.
For more information about In+f4 and other hotkeys, refer to the
"Hotkeys" section in Chapter 2, "TouchPad and Keyboard."
CD and DVD Procedures
Inserting or Removing a Disc
Use the tbllowing procedures to insert or remove an optical disc
such as a CD or a DVD. A disc that is playing must be stopped
beIbre it can be removed. To stop a disc, press the fn+fl0 hotkey.
To insert a disc--Be sure the notebook is turned on. Then
press the release button O on the drive bezel to release the
media tray. Pull the tray outward O, place the disc label-side
up on the media tray 0, and then close the media tray 0.
To remove a disc while the notebook is turned on--Press
the release button on the drive bezel to release the media tray.
Pull the tray outward, remove the disc, and then close the
media tray.
4-6 Hardware and Software Guide
To Next Page
Loading...
