1.
Source: Selects the video input (DVI or DisplayPort)
5.
Power LED: Blue = Fully powered.
Amber = Sleep mode.
Continuous Flashing Blue (0.5 Hz) = Unsupported Mode
Three Flashes of Blue (0.5 Hz) = Upper or Lower Limit of
Brightness Control
2.
Minus (-): Decreases Brightness adjustment level.
3.
Plus (+): increases Brightness adjustment level
4.
Power: Turns the monitor on or off if Master Power Switch
(rear) is On.
HP ZR2740w Bezel Buttons
Models
XW476A4, XW476A8
QuickSpecs
HP ZR2740w 27-inch LED Backlit IPS Monitor
Overview
DA - 14144 North America — Version 5 — June 25, 2013
Page 1
To Next Page
