HPC Blitz 1200CMB - Medeco Key Decoding and Cutting

Blitz
™
No. 1200CMB
57
The depths and angles must be decoded prior to cutting the key. Depths can be
measured with a knife-edge caliper, a key micrometer or with one of the special
decoders commercially available. The HPC Pocket Sized Decoder, No. HKD-75
(pictured above), in addition to decoding depths and angles for Medeco
®
also contains
an assortment of cards for other locks. Remember decoding devices are not designed
to replace micrometers or calipers.
CUTTING KEYS FOR MEDECO
®
DECODING AND CUTTING THE KEY
Install the No. CW-1012
and MJ-1 (Jaw “C”).
*Medeco
®
is a registered trademark of Medeco Security Locks, Inc.