Need help?Do you have a question about the HPE Alletra 5030 and is the answer not in the manual?
General| Controller Model | HPE Alletra 5030 |
|---|---|
| Form Factor | 2U |
| Number of Controllers | 2 |
| Memory per Controller | 64 GB |
| Flash Cache | Optional |
| Drive Support | SAS |
| RAID Levels | 0, 1, 5, 6, 10 |
| Controller Type | Dual Active/Active |
| Host Ports | 16 |
| Host Interface | Fibre Channel, iSCSI |
Lists necessary components and environmental considerations for array installation.
Instructions for sliding the array chassis into the installed rack rails.
Steps to secure the chassis to the rack and attach the front bezel.
Connects network ports for management and data according to network topology.
Step-by-step guide to connecting power to the array's power supplies.
Steps to activate software subscriptions required for array usage.
Guide to creating a user account for HPE GreenLake common cloud services.
Procedure for setting up a workspace within the HPE GreenLake environment.
Describes common alarms and troubleshooting steps for connectivity issues.
Guides the user through connecting the storage array to HPE GreenLake.
Steps to initialize the array software after connecting to Data Services Cloud Console.
Guide to creating a new group from an uninitialized array using the setup manager.
Step-by-step guide to replacing an SSD in the array or expansion shelf.
Step-by-step guide to replacing an HDD in the array or expansion shelf.
Detailed steps for replacing a failed or upgraded controller.
Procedure to replace NICs, HBAs, or SCM cards in the controller.
Guide to replacing a failed SFP transceiver in the storage array.
Guide to replacing a failed AC power supply unit (PSU).
Guide to replacing a failed DC power supply unit (PSU).
Step-by-step guide for replacing the chassis of the storage array.
Procedure to add Hard Disk Drives (HDDs) to increase storage capacity.
Procedure to add Solid State Drives (SSDs) to enhance cache performance.
Steps to upgrade network interface cards (NICs) or HBAs.
Procedures for upgrading storage array controllers to newer models.
Specific steps for upgrading controllers for Alletra 5010/HF20 models.
Specific steps for upgrading controllers for Alletra 5030/HF40 models.
How to check and manage system temperatures to prevent overheating.
Essential electrical safety measures for protecting users and equipment.
Safety guidelines specific to AC power connections and supplies.
Safety guidelines specific to DC power connections and supplies.
To Next Page
